日日干日日色,黄色三级a,高h喷汁呻吟3p

Home " Information " SSI signal gate opening meter, gate opening load measuring and controlling meter

SSI Signal Gate Opening Gauge, Gate Opening Load Measuring and Control Instrument - Civiti — gate opener

Main characteristics

Connection of SSI signal sensors of various brands

SSI signals can be redundantly connected to both the PLC's SSI module and the instrument.

Powerful signal and power anti-interference fault tolerance function, more reliable and safe

10～28 bits adjustable, Gray code, pure binary code optional

Single-turn, multi-turn absolute encoders, magnetostrictive linear sensors

Intelligent panel settings, multiple function displacement control applications

RS485 digital communication, 4-20mA, 4-8 point switch multiple output signals

appliance

Gate and valve opening control

Hydraulic cylinder stroke control

Hoist crane positioning, traveling crane positioning

Steelmaking oxygen lance positioning, converter positioning

Automatic storage, paper and textile web positioning

Automated position, length and height measurement and positioning

model number

Model:	BTM1213/RS
Housing Material	Aluminum metal
Overall dimensions (width, height and depth)	160 x 80 x 170
Meter opening size	152 x 75
Digital display digits	6-digit digital display
input signal	SSI Synchronous Serial Signal 10-28 bits; 1-bit External Set Signal
Number of switching outputs	4～8 (relay, one normally open and one normally closed for each position);panel preset, sensitivity setting, switch form setting
scale factor	Linear Displacement Transducer Code Value Scaling Factor Setting
Zero Setting	Any position setting, panel smart setting or external switch setting
Orientation settings	Rotary encoder forward and reverse setting; linear displacement transducer forward and reverse setting.
Circle Length Setting	Rotary encoder length per revolution setting; linear displacement transducer total length setting.
signal conditioning	4, 20mA corresponding value can be set, 4, 20mA output value can be fine-tuned zero, full
Position signal output	2 position signal outputs, one 4-20mA analog, one RS485 communication digital
nonlinear setting	Multiple non-linear settings or on-site corrections are possible, and can be used for settings such as winch stacks and curved gates.
communication protocols	Self-contained instrument protocol, can also be customized according to user-provided protocol requirements; can be set by the panel address, rate
remote display	The output signal can be one way into the PLC, one way into the remote display meter (optional RS485 digital display meter or 4-20mA display meter).
external power supply	Power supply for the sensor is available (specify voltage and current consumption when ordering).
operating voltage	220Vac (24Vdc can be customized)
operating temperature	-10℃～60℃
relative humidity	<85%